News

Coppola Roberto

ENEA-Casaccia, FSN-SICNUC, Italy

Stress distributions in  P91 martensitic steel  and in  AISI 316LN  steel welds for Gen IV nuclear applications

Coppola Roberto

ENEA-Casaccia, FSN-SICNUC, Italy

Neutron diffraction study of a CeO2 coated Ni-based anode for high-temperature molten carbonate fuel cells

Dovzhenko Gleb

Helmholtz-Zentrum Geesthacht, Germany

Residual Stresses and Temperature Fields in AA6082 Friction Surfacing

Mikhail Egorov

Saint-Petersburg State University of Aerospace Instrumentation (SUAI), Russia

Efficiency upgrade of separator-superheaters in NPP with pressurized water and boiling water reactors by physical-modeling based modernization

Gan Weimin

GEMS at MLZ, Helmholtz-Zentrum Geesthacht, Germany

In-situ neutron diffraction study of engineering materials under thermo-mechanical treatment at STRESS-SPEC

Hoelzel Markus

TU Munich, FRM II / MLZ, Germany

Diffraction based determination of single-crystal elastic constants on polycrystalline titanium alloys

Huang Yuanding

MagIC, Helmholtz-Zentrum Geesthacht, Germany

In-situ neutron diffraction study on compressive behavior of solution heat-treated Mg-Ca alloys at room and elevated temperature

Isakova Natalia

National Research Centre "Kurchatov Institute", Russia

Two-directional stress-free comb sample for neutron stress diffractometry.

Karpov Ivan

National Research Centre "Kurchatov Institute", Russia

Neutron diffraction research of residual stress in thin 410 steel plate, deposited on rigid substrate by DLMD method

Kononikhina Victoria

Helmholtz-Zentrum Geestacht, Germany

The order/disorder transformation of ОІ phase in binary and ternary Оі TiAl based alloys studied by synchrotron and neutron diffraction

Kucerakova Monika

Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Czech Republic

Investigation of textures of alpha zirconium and zirconium-alloy by neutron and X-ray diffraction

Makhmudov Khairullo

Ioffe Institute, Russia

A STUDY OF THE ACOUSTIC PROPERTIES OF ROCK MASSIF AND CONCRETE LINING UNDER NATURAL CONDITIONS

Michtchenko Alexandre

Instituto Politecnico Nacional, SEPI-ESIME-Zacatenco, Mexico

PRINTED TECHNOLOGIES FOR SUPERCONDENSATORS - ONE OF THE APPLICATIONS OF GRAPHEN-LIKE MATERIALS

Murashev Mikhail

National Research Centre "Kurchatov Institute", Russia

The method for neutron imaging of components with lattice structure, produced by additive manufacturing

Noguera Crespo Pedro

AVS

New small-angle scattering beamlines for MAX IV and SIRIUS synchrotrons

Ohl Michael

Forschungszentrum Julich, Jllich Centre for Neutron Science (JCNS 1), Germany

Boosting charge transport in Poly(ethylene-oxide) comb polymers for applications in Li-ion batteries

Protsenko Andrey

National Research Centre "Kurchatov Institute", FSRC "Crystallography and Photonics" RAS, Russia

QEXAFS methods development using X-ray adaptive bending piezo-actuator

Romanelli Giovanni

ISIS Facility, Rutherford Appleton Laboratory, UK

Visualisation of the catalysed nuclear-spin conversion of molecular hydrogen using energy-selective neutron imaging

Rylov Sergey

National Research Centre "Kurchatov Institute", Russia

Residual stress investigation by neutron diffraction in a 7.4 mm thick Inconel 625 plate produced by direct metal laser deposition (DLMD) on rigid substrate

Solis Cecilia

Heinz Maier-Leibnitz Zentrum (MLZ), Technische Universitat Munchen, Germany

High-temperature studies on a new Ni-based superalloy VDM 780 Premium using neutron diffraction and small-angle neutron scattering

Soria Sergio

Forschungs-Neutronenquelle FRM II, Technische Universitat Munchen, Germany

Quantification of phases by strain-induced martensitic transformation in Austempered Ductile Iron (ADI) using neutron transmision

Strunz Pavel

Nuclear Physics Institute of the CAS, Czech Republic

Evaluation of anisotropic small-angle neutron scattering data  from metastable ОІ-Ti alloy

Strunz Pavel

Nuclear Physics Institute of the CAS, Czech Republic

Neutron diffraction study of Ti-Zr alloy microstructure evolution during annealing after severe plastic deformation

Tsapatsaris Nikolaos

European Spallation Source, Sweden

Correlation of Microstructural Damage to Functional Properties of Irradiated Carbon Fibre Based Composites Used in Neutron Chopper Discs

Tung Patrick

Institute of Physics at Czech Academy of Science, Czech Republic

3D Grain Mapping with Simultaneous Neutron Imaging and  Time-of-Flight Neutron Scattering

Venter Andrew

Necsa SOC Ltd, Research and Technology Development, South Africa

Residual stress studies of WC-VC-Co hardmetal sinters and coatings using diffraction techniques

Yang Bin

Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, China

Enhanced radiation and corrosion resistance of 316LN stainless steel with high densities of dislocations and twins